LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 483 (Disc Brakes (Cab & Chassis, & Hd)) >> Removal & Installation >> Park Brake Hardware >> Removal

Park Brake Hardware: Removal

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drum. See PARK BRAKE DRUM  .
  2. Release the tension from the index lever by unhooking the spring from the index lever. See Fig 1 .
  3. Remove the transmission yoke bolt from the automatic transmission or nut from the manual transmission.
  4. Pull out on the transmission yoke to remove it from the transmission.
  5. Remove the support plate bolts and washers.
  6. Remove the backing plate, support plate, index lever and spring, and park brake shoe assembly from the vehicle.
  7. Separate the support plate and the park brake shoe assembly from the backing plate. See Fig 2 .
  8. Remove the park brake hardware.
Fig 1: Releasing Tension From Index Lever
G00317543Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing Park Brake Hardware
G00317544Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals