Park Brake Shoe: Removal
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear brake rotor. See REAR BRAKE ROTOR .
- Remove the rear wheel bearing/hub. See REAR WHEEL BEARING/HUB .
- Rotate the parking brake adjusting nut until all park brake shoe adjustment has been removed.
- Remove the parking brake shoe retaining spring.
- Remove the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe from the actuator assembly.