BRAKELIGHT/Cruise Control Switch Adjustment
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- With the brake pedal depressed, insert the stoplamp/cruise control switch into the retainer until the switch body seats in the retainer.
- Note that "CLICKS" can be heard as the threaded portion of the switch is pushed through the retainer.
- Slowly pull the brake pedal fully rearward against the stop until the "CLICK" sound can no longer be heard. The switch will be moved in the retainer providing proper adjustment.