Removal - Equalizer
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Disconnect the left rear park brake cable and adjustment stud assembly from the equalizer assembly by removing the equalizer nut from the adjustment stud.
- Disconnect the front park brake cable from the right rear cable at the connector clip. See Figure.
- Remove the equalizer assembly from the front park brake cable. Use a flat bladed tool to release the assembly from the cable. See Figure.