Removal (Front)
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the left-side instrument panel insulator.
- Remove the left-side door sill plate.
- Fold back the carpet for access.
- Raise and support the vehicle.
- Loosen the park brake cable equalizer nut in order to remove the park brake left side cable from the park brake equalizer.
- Remove the park brake cable end from the park brake cable connector.
- Remove the park brake cable from the park brake cable equalizer.
- Remove the park brake cable from the park brake cable guides.
- Remove the park brake cable nuts from the underbody studs.
- Remove the park brake cable clips from the park brake cable.
- Lower the vehicle.
- Remove the park brake cable end from the park brake lever clevis.
- Use the Park Brake Cable Release Tool (J-37043) in order to remove the cable from the lever.
- Remove the front park brake cable from the vehicle.