LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect brake pipes from the master cylinder.
  2. Disconnect fluid level sensor electrical connector.
  3. Remove master cylinder mounting nuts.
  4. Remove the master cylinder. See Figure
  5. Drain the master cylinder reservoir of all brake fluid.
  6. Remove the master cylinder reservoir. See MASTER CYLINDER RESERVOIR .