LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Hardware >> Installation - Rear Disc

Installation - Rear Disc

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any corrosion from the brake rotor flange.
  2. Use the Hub Cleaning Kit (J-42450-A) in order to clean the hub flange.
  3. Install the brake rotor.
  4. Lubricate and Install the caliper bolt boots to the disc brake caliper mounting bracket.
  5. Lubricate and Install the disc brake pad retainers to the disc brake caliper bracket.
  6. Install the disc brake pads to the disc brake caliper bracket.
  7. Install the disc brake caliper to the mounting bracket.
  8. Install the disc brake caliper bolts. Tighten the disc brake caliper bolts to specification. See TORQUE SPECIFICATIONS .
  9. Install the tire and wheel.
  10. Lower the vehicle.
  11. Fill the master cylinder to the proper level. See MASTER CYLINDER RESERVOIR  under BLEEDING, FILLING & FLUSHING BRAKE SYSTEM.
  12. Apply and release the brake pedal (3/4 stroke) as many times as necessary in order to obtain a firm brake pedal.
scientia non olet · About LEMON Manuals