LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Caliper Bracket >> Installation (Rear)

Installation (Rear)

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake caliper bracket.
  2. Install the caliper bracket bolts. Tighten the brake caliper bracket bolts to specification. See TORQUE SPECIFICATIONS .
  3. Install the brake pad retainers to the brake caliper bracket.
  4. Apply a thin coat of (GM P/N 18010909) or equivalent to the brake pad retainers where the brake pads contact the brake pad retainers.
  5. Lubricate the brake caliper bolt bushings with (GM P/N 18010909) or equivalent.
  6. Install the brake caliper bolt bushings to the brake caliper bracket.
  7. Lubricate the brake caliper bolt boots with (GM P/N 18010909) or equivalent.
  8. Install the brake caliper bolt boots to the brake caliper bracket.
  9. Install the brake caliper. See BRAKE CALIPER .
  10. Install the tire and wheel.
  11. Lower the vehicle.
scientia non olet · About LEMON Manuals