Stoplight Switch: Adjustment
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Adjust the stoplight switch and cruise control release at the same time. The adjustment procedures for the stoplight switch and the cruise control release switch are identical.
- Insert the stoplight switch and the cruise control switch if equipped into the brake pedal bracket.
- Install the stoplight switch and the cruise control switch if equipped into the slotted grooves until the switches are fully depressed against the brake pedal, then turn the switches clockwise approximately 1/4 turn, the switches should now be installed and adjusted.
- Inspect the stoplights and the cruise control for proper operation.