LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Cable Mounting Bracket >> Installation

Park Brake Cable Mounting Bracket: Installation

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the park brake cable mounting bracket.
  2. Install the park brake cable mounting bracket bolt. Tighten the mounting bracket bolt to specification. See TORQUE SPECIFICATIONS .
  3. Install the rear cables to the mounting bracket by inserting the cable till all the retaining tabs snap into place.
  4. Install the park brake equalizer. See PARK BRAKE CABLE EQUALIZER .
  5. Adjust the park brake. See PARK BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals