LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Drum Brake Hardware >> Installation

Drum Brake Hardware: Installation

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the actuator lever and the lever pivot.
  2. Install the actuator lever return spring.
  3. Install the hold down pins.
  4. Install the hold down springs.
  5. Install the brake shoe guide.
  6. Install the brake shoe return springs.
  7. Install the brake drum.
  8. Install the tire and wheel assembly.
  9. Adjust the brakes. See DRUM BRAKE SYSTEM  under ADJUSTMENTS & INSPECTION.
  10. Lower the vehicle.
scientia non olet · About LEMON Manuals