LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Disc Brake Hardware - Rear >> Removal

Disc Brake Hardware - Rear: Removal

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the disc brake caliper. See BRAKE CALIPER - REAR .
  2. Remove the disc brake pads.
  3. Remove the disc brake pad retainers.
  4. Remove the caliper pins from the disc brake caliper mounting bracket.
  5. Remove the caliper pin boots from the disc brake caliper mounting bracket.
  6. Lightly wire brush all brake pad contact areas in order to remove any corrosion.
scientia non olet · About LEMON Manuals