Disc Brake Hardware - Front Single Piston: Removal
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the tire and wheel assembly.
- Remove the brake caliper. See BRAKE CALIPER - FRONT SINGLE PISTON .
- Remove the front brake pads.
- Remove the front disc brake inner pad retainer spring.
- Remove the front brake caliper bolt, bolt sleeve and bolt sleeve bushing.
- Lightly brush all brake pad contact areas.