LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Disc Brake Hardware - Front Dual Piston >> Installation

Disc Brake Hardware - Front Dual Piston: Installation

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean area using denatured alcohol.
  2. Dry area using non-lubricated, filtered air.
  3. Apply high temperature silicone brake lubricant to the brake caliper pin bolts. DO NOT apply lubricant to the brake pad hardware.
  4. Install the bushings to the mounting bracket.
  5. Install the brake pad wear sensors.
  6. Install the brake pads.
  7. Install the front brake caliper. See BRAKE CALIPER - FRONT DUAL PISTON .
  8. Install the tire and wheel assembly.
  9. Lower the vehicle.
  10. With the engine running, firmly pump the brake pedal three times.
scientia non olet · About LEMON Manuals