LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Rotor - Rear >> Installation

Brake Rotor - Rear: Installation

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the Wheel Hub Resurfacing Kit, clean the axle flange.
  2. Install the brake rotor.
  3. Install the brake caliper mount. See BRAKE CALIPER - REAR .
  4. Install the brake pads. See BRAKE PADS - REAR .
  5. Install the brake caliper. See BRAKE CALIPER - REAR .
  6. Burnish replaced or refinished rotors. See BURNISHING PADS AND ROTORS  under SERVICING.
scientia non olet · About LEMON Manuals