LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Hose >> Removal (Front)

Removal (Front)

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the front tire and wheel assembly.
  3. Clean all dirt and other foreign material from the brake hoses and brake pipe fitting.
  4. Using a backup wrench on the brake pipe fitting, disconnect the brake pipe fitting from the brake hose fitting.
  5. Disconnect the brake pipe fitting from the flex brake hose at the frame.
  6. Remove the front brake hose retainer at the frame bracket.
  7. Remove the hose front flex brake hose bolt and gaskets from the brake caliper.
  8. Remove the brake hose from the brake caliper.
  9. Remove the copper gaskets from the brake hose bolt. These gaskets may stick to the brake caliper or the brake hose bolt.
scientia non olet · About LEMON Manuals