LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Caliper - Rear >> Removal

Brake Caliper - Rear: Removal

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the brake hose to brake caliper bolt.
  4. Discard the metal gaskets.
  5. Plug the opening in the front brake hose with a rubber plug in order to prevent brake fluid loss and contamination.
  6. Remove the caliper guide pin bolts.
  7. Remove the caliper from the caliper anchor bracket.