Brake Caliper - Front Dual Piston: Removal
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the tire and wheel assembly.
- Remove the brake caliper hose bolt from the brake caliper. See Figure.
- Remove the 2 copper gaskets from the brake hose bolt. These gaskets maybe stuck to the brake caliper and/or the brake hose end.
- Discard the 2 copper gaskets.
- Plug the opening in the front brake hose in order to prevent excessive brake fluid loss and contamination.
- Remove the brake hose and washers from the brake caliper.
- Remove the brake caliper guide pin bolts.
- Remove the brake caliper assembly.