LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 465 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Master Cylinder >> Installation

Master Cylinder: Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate reservoir seals and bayonets with brake fluid.
  2. Install reservoir seals to master cylinder body.
  3. Install reservoir to master cylinder body by pushing reservoir bayonets straight down into the seals in master cylinder body.
  4. Install NEW reservoir attachment pins. Ensure that attachment pins are fully and firmly seated.
  5. Install brake fluid level sensor.
  6. Connect low brake fluid level sensor electrical connector.
  7. Fill master cylinder reservoir. Bleed hydraulic brake system. See BLEEDING BRAKE SYSTEM  .
scientia non olet · About LEMON Manuals