Disc Brakes Service Specifications
WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKES SERVICE SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Front Brakes | ||||
| Rotor Discard Thickness (1) | 1.21" (30.7 mm) | |||
| Rotor Maximum Allowable Assembled Lateral Runout | 0.002" (0.06 mm) | |||
| Rotor Maximum Allowable Scoring | 0.059" (1.50 mm) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001" (0.025 mm) | |||
| Rotor Minimum Allowable Thickness After Refinish | 1.25" (31.7 mm) | |||
| Rotor Thickness (NEW) | 1.27" (32.2 mm) | |||
| Rear Brakes | ||||
| Rotor Discard Thickness* | 0.35" (9.0 mm) | |||
| Rotor Maximum Allowable Assembled Lateral Runout | 0.002" (0.06 mm) | |||
| Rotor Maximum Allowable Scoring | 0.059" (1.50 mm) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001" (0.025 mm) | |||
| Rotor Minimum Allowable Thickness After Refinish | 0.42" (10.6 mm) | |||
| Rotor Thickness - New | 0.43" (11.0 mm) | |||
|
||||