Removal & Installation: O-Ring: Removal
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
- Disassemble the A/C refrigerant components. For compression style fittings use a back up wrench on the fitting and loosen the fitting nut. See Fig 1. For banjo style fittings remove the bolt retaining the banjo type fitting. Remove the O-ring seal from the A/C refrigerant component.
- Inspect the O-ring seal for signs of damage to help determine the root cause of the failure. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
- Cap or tape the A/C refrigerant components. Discard the O-ring seal.