LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (HVAC Systems - Manual) >> Removal & Installation >> Compressor >> Installation (8.1L with Harrison - 3500 HD, Cab & Chassis, Sierra, Silverado)

Installation (8.1L with Harrison - 3500 HD, Cab & Chassis, Sierra, Silverado)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Add the proper amount of PAG oil to the compressor crankcase. See SPECIFICATIONS . Install the A/C compressor drain plug. Tighten to specification. See TORQUE SPECIFICATIONS .
  2. NOTE: Insert the mounting bolt into the lower right mounting bracket before installing the A/C compressor.
  3. Install the A/C compressor to the mounting bracket. See Figure. Install the 3 A/C compressor mounting bolts. Tighten to specification.
  4. Connect the electrical connection. Install the A/C compressor hose assembly to the compressor using new sealing washers. Install the A/C compressor hose assembly bolt to the A/C compressor. Tighten to specification.
  5. Install the right wheel house panel. Install the right front tire and wheel assembly. Lower the vehicle. Install the A/C drive belt. Evacuate and recharge the A/C system. See RECOVERY/EVACUATION & RECHARGING in GENERAL SERVICING PROCEDURES article in GENERAL SERVICING. Leak test the fittings of the component using a Leak Detector.