Zone 9
WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off and key is removed. Connect Side Impact Sensor (SIS) connector. Install Connector Position Assurance (CPA) clip. Install SIS. See SIDE IMPACT SENSOR (SIS) under REMOVAL & INSTALLATION.
- Connect passenger-side air bag module connector, located to right of steering column. See Figure. Install CPA clip. Connect driver-side air bag module connector, located to right of steering column. See Figure. Install CPA clip. Install driver-side knee bolster.
- Install AIR BAG fuse in fuse block. Install right-side instrument panel access hole cover. Staying well away from air bag modules, turn ignition on. Check SIR system for proper operation. See SYSTEM OPERATION CHECK .