Removal & Installation
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See ZONE 3 under DISABLING & ACTIVATING AIR BAG SYSTEM.
- Remove driver-side air bag module. See AIR BAG MODULES . Remove and discard steering wheel nut. Using Steering Wheel Puller (J-1859-A) and Puller Legs (J-42120), remove steering wheel.
- To install, reverse removal procedure. Tighten NEW steering wheel nut and driver-side air bag module bolts to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ZONE 3 under DISABLING & ACTIVATING AIR BAG SYSTEM.