LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 438 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Passenger-Side Air Bag Module Disable Switch >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Ensure ignition is off and key is removed. Open glove box door. Using a small, flat-blade screwdriver, carefully pry passenger-side air bag module disable switch from switch mounting plate. Remove Connector Position Assurance (CPA) clip from switch electrical connector. Disconnect electrical connector. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals