EVAP Canister: Installation
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix, 2003 Chevrolet Monte Carlo, 2003 Chevrolet Impala, 2003 Buick Regal, and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Replace the retaining strap when replacing the EVAP canister.
Install the EVAP canister to the EVAP canister bracket and position the canister on the underbody. Tighten to specifications, see TORQUE SPECIFICATIONS . Connect the EVAP purge pipe, vapor pipe and vent hose/pipe to the EVAP canister. Lower the vehicle.