LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 415 (Engine Mechanical - 8.1L V8) >> Removal & Installation >> Timing Chain & Sprockets >> Removal

Timing Chain & Sprockets: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Suburban, and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine front cover. See ENGINE FRONT COVER .
  2. Align timing marks on camshaft and crankshaft sprockets.
  3. Remove camshaft sprocket bolts.
  4. Remove camshaft sprocket and timing chain.
  5. Install Crankshaft Protector Button (J 42846) into the end of the crankshaft.
  6. Remove crankshaft sprocket using a suitable 3-jaw puller.
  7. Clean and inspect timing chain and sprockets. Inspect for worn teeth, damaged teeth, chipped teeth, uneven wear on one edge of teeth, worn valleys between sprocket teeth, and crankshaft sprocket keyway for wear.
scientia non olet · About LEMON Manuals