LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 415 (Engine Mechanical - 8.1L V8) >> Removal & Installation >> Engine Front Cover >> Removal

Engine Front Cover: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Suburban, and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove water pump. See WATER PUMP .
  2. Remove crankshaft balancer. See CRANKSHAFT BALANCER .
  3. Disconnect Camshaft Position (CMP) sensor electrical connector.
  4. Remove engine harness clips from battery cable channel.
  5. Remove CMP sensor bolt and sensor. See Figure.
  6. Remove battery cable channel bolt.
  7. Remove and reposition battery cable channel.
  8. Remove engine front cover bolts. Remove engine front cover. See Figure.
  9. Remove engine front cover gasket.
  10. Remove crankshaft front oil seal from front cover.