LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 415 (Engine Mechanical - 8.1L V8) >> Overhaul >> Intake Manifold >> Assembly

Intake Manifold: Assembly

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Suburban, and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a very light film of clean engine oil to purge solenoid seal.
  2. Install purge solenoid.
  3. Apply thread adhesive to purge solenoid bolt threads.
  4. Install and tighten purge solenoid bolt to specification. See TORQUE SPECIFICATIONS .
  5. Install purge solenoid vacuum hose.
  6. Install EGR adapter gasket.
  7. Install EGR adapter.
  8. Install and tighten EGR adapter nuts to specification. See TORQUE SPECIFICATIONS .
  9. Install EGR valve gasket and EGR valve.
  10. Install and tighten EGR valve nuts to specification. See TORQUE SPECIFICATIONS .
  11. Install MAP sensor. Tighten MAP sensor bolt to specification. See TORQUE SPECIFICATIONS .
  12. Install throttle body gasket. Install throttle body.
  13. Install throttle body nut and tighten to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals