LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 406 (Engine Mechanical - 3.5L (On-Vehicle)) >> Repair Instructions >> Valve Lifter Replacement- Left >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fill the stationary hydraulic lash adjuster (SHLA) with clean engine oil and lubricate the all outer surfaces. Take precautions to prevent scratching the head area (1) of the adjuster.
  2. Lubricate the lash adjuster bore in the cylinder head with clean engine oil.
    Fig 1: Identifying Stationary Hydraulic Lash Adjuster Head
    G01816897Courtesy of GENERAL MOTORS CORP.
  3. Install the lash adjuster in the cylinder head.
  4. Install the left (front) valve rocker arm(s). Refer to Valve Rocker Arm Replacement- Left .
    Fig 2: Installing Stationary Hydraulic Lash Adjuster
    G01816898Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals