Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Install the PCV valve (2) into the PCV hose (1).
- Push the PCV valve (2) into the left camshaft cover (3).
- Align the rear tab with the slot in the rear bracket and push the sight shield inward to engage.
- Pull sight shield down and align the studs on the intake manifold with the holes in the sight shield.CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the fuel injector sight shield nuts.
Tighten
Tighten the fuel injector sight shield nuts to 3 N.m (27 lb in).