LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 406 (Engine Mechanical - 3.5L (On-Vehicle)) >> Repair Instructions >> Engine Mount Bracket Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front engine mount bracket to the engine.
    Fig 1: Installing Front Engine Mount Bracket Bolts
    G01816652Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the front engine mount bracket bolts (1-3).

    Tighten 

    Tighten the front engine mount bracket bolts in sequence (1-3) to 58 N.m (43 lb ft).

  3. Install the nut (1) securing the front engine mount to the front engine mount bracket.

    Tighten 

    Tighten the front engine mount to bracket nut to 55 N.m (41 lb ft).

  4. Remove the engine support fixture. Refer to Engine Support Fixture .
  5. Install the left exhaust manifold. Refer to EXHAUST MANIFOLD REPLACEMENT - LEFT (LX5) or EXHAUST MANIFOLD REPLACEMENT - LEFT (L47) in Engine Exhaust.
    Fig 2: Installing Front Engine Mount To Front Engine Mount Bracket Nut
    G01816653Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals