LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 406 (Engine Mechanical - 3.5L (On-Vehicle)) >> Repair Instructions >> Drive Belt Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. Refer to DRIVE BELT REPLACEMENT .
  2. Remove the drive belt tensioner bolt from the cylinder head (1).
  3. Remove the drive belt tensioner.
    Fig 1: Installing Drive Belt Tensioner
    G01816620Courtesy of GENERAL MOTORS CORP.