Removal Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the 2 nuts from the fuel injector sight shield.
- Lift the sight shield from the front and pull forward to disengage the rear tab from the bracket.
- Disconnect the PCV fresh air tube (2) from the right camshaft cover.
- Remove the PCV fresh air tube (2) from the throttle body.
- Remove the retaining clip securing the PCV dirty air tube (1).
- Disconnect the PCV dirty air tube (1) from the PCV valve.
- Remove the PCV dirty air tube (1) from the intake manifold.