EGR Valve Vacuum Sensor: Installation
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Install the EGR valve vacuum sensor to the bracket. Connect the EGR valve vacuum sensor vacuum line. Connect the EGR valve vacuum sensor electrical connector. Connect the negative battery cables. Tighten battery cable bolts to specification. See TORQUE SPECIFICATIONS .