Removal (Cab & Chassis - Auxiliary)
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the fuel tank. See FUEL TANK DRAINING . Raise and support vehicle. Remove the fuel tank shield. See Figure. Disconnect the fuel fill and vent pipes from the fuel tank.
- Place a suitable adjustable jack under the fuel tank. Remove the fuel tank strap attaching bolts. Remove the fuel tank straps. Lower the fuel tank slightly. Disconnect the fuel pipes from the fuel sender assembly. See QUICK CONNECT FITTINGS (METAL COLLAR) . Disconnect the fuel sender assembly harness connector.
- Lower the fuel tank. With the aid of an assistant, place the fuel tank in a suitable work area. Cap the fuel pipes in order to prevent possible fuel system contamination. If replacing the fuel tank, remove the sender assembly. See FUEL SENDER ASSEMBLY .