LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 397 (Engine Controls - Removal & Installation - Diesel) >> Air Induction Systems >> Air Cleaner Outlet Duct >> Installation

Air Cleaner Outlet Duct: Installation

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. The outlet duct must be fully seated against the positive stop feature on the turbocharger inlet. Install the outlet duct to the turbocharger. Align the outlet duct alignment indicator to the turbocharger alignment indicator.
  2. Install the outlet duct to the MAF/IAT sensor. Tighten the outlet duct clamps at the turbocharger and the MAF/IAT sensor to specification. See TORQUE SPECIFICATIONS .
  3. Install the upper intake manifold cover. Install the upper intake manifold cover to the outlet duct. Tighten the outlet duct clamp at the upper intake manifold cover to specification.
Fig 1: Removing Upper Intake Manifold Cover
G00079460Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing Air Cleaner Outlet Duct
G00232238Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals