LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Automatic Transaxle Overhaul & Testing - 4T65-E) >> Component Disassembly & Reassembly >> Input & 3RD Sprag Clutches >> Disassembly

Input & 3RD Sprag Clutches: Disassembly

WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove input and 3rd sprag clutch assemblies from input clutch housing. See Figure. Remove and discard spiral lock retaining ring from input clutch sprag outer race retainer. Remove 3rd clutch sprag assembly and input clutch sprag assembly from input and 3rd clutch sprag inner race. See Figure. Remove input and 3rd clutch sprag inner race and input sun gear spacer from input sun gear.
    2. NOTE: DO NOT disassemble sprag elements.
  2. Remove 3rd clutch sprag outer race retainer. Remove input and 3rd clutch sprag end bearings and input and 3rd clutch sprag center bearing from sprag outer races. Remove 3rd clutch and input clutch sprag assemblies from sprag outer races. See Figure.
scientia non olet · About LEMON Manuals