Disassembly & Reassembly

WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If check ball valve does not leak, DO NOT replace.

Remove check ball valve from housing using 1/4" drift and hammer. See Fig 1. Tap in NEW check ball assembly using same drift and hammer. See Fig 2.

Fig 1: Removing 2nd Clutch Housing Check Ball Valve

Courtesy of GENERAL MOTORS CORP.

Fig 2: Installing 2nd Clutch Housing Check Ball Valve

Courtesy of GENERAL MOTORS CORP.