1-2 Support Roller Clutch: Reassembly
WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.
Install 1-2 roller clutch assembly into 1-2 support drum. Note position of cage assembly to inner race. See Figure. Install thrust bearing onto 1-2 support drum. Press down with hand pressure only.