EVAP Canister Vent Solenoid: Removal
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Disconnect the Evaporative (EVAP) canister vent solenoid electrical connector. Remove the EVAP canister vent solenoid bracket bolt. Remove the EVAP pipe from the clips. Disconnect the EVAP vent pipe from the EVAP canister.
- Remove the EVAP canister vent solenoid and pipe from the vehicle. If necessary, disconnect the EVAP vent pipe from the EVAP canister vent solenoid. If necessary, detach the EVAP canister vent solenoid from the bracket.