EVAP Canister Vent Solenoid: Installation
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- If necessary, attach the EVAP canister vent solenoid to the bracket. If necessary, connect the EVAP vent pipe to the EVAP canister vent solenoid. Install the EVAP canister vent solenoid and pipe to the vehicle.
- Install the EVAP canister vent solenoid bracket bolt and tighten the bolt to specification. See TORQUE SPECIFICATIONS . Connect the EVAP canister vent solenoid electrical connector. Lower the vehicle.