LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Manual Transmission Clutches) >> Removal & Installation >> Clutch Assembly & Pilot Bearing >> Inspection

Clutch Assembly & Pilot Bearing: Inspection

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all components with water-dampened cloth to remove asbestos fibers. Clean flywheel housing with solvent. Release bearing is permanently packed with lubricant and should not be cleaned with solvent.
  2. Inspect all components for wear or damage. Inspect all contact surfaces for scoring, warping and damage. Inspect friction surfaces for excessive oil. Inspect splines for nicks, burrs and sliding fit.
scientia non olet · About LEMON Manuals