LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 365 (Rear Suspension System) >> Removal & Installation >> Stabilizer Shaft Link (35 Series) >> Installation

Stabilizer Shaft Link (35 Series): Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer shaft link to the frame (1) and to the stabilizer shaft and install the retaining bolt (5) and nut (3). Tighten the stabilizer shaft link-to-frame nut to specification. See TORQUE SPECIFICATIONS  . Tighten the stabilizer shaft link-to-stabilizer shaft nut to specification.
  2. Lower the vehicle.
scientia non olet · About LEMON Manuals