Stabilizer Shaft (35 Series): Removal
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the stabilizer shaft link bolt (5) and nut (3) from the frame (1). See Fig 1
.
- Remove the stabilizer shaft insulator bracket nuts (4) and insulator brackets (2) from the rear axle (3). See Fig 2
.
- Remove the stabilizer shaft (4). See Fig 1
.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.