LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 362 (Engine Controls - Removal & Installation) >> Ignition Systems >> Ignition Coil(S) >> Removal (Bank 1)

Removal (Bank 1)

WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bank 1 is the cylinder head that is closest to the rear of engine compartment. Turn ignition off. Remove mounting the 2 mounting nuts from the injector sight shield (top engine cover). Lift the injector sight shield off the mounting studs by lifting at the front of the cover. Disconnect the Ignition Control Module (ICM) electrical connector.
  2. Disconnect the AIR vent solenoid harness connector. Remove the bank 1 AIR shut-off valve. See SECONDARY AIR INJECTION SHUT-OFF VALVE  under EMISSION SYSTEMS & SUB-SYSTEMS.
  3. Using the removal sequence, remove the ignition cassette retaining bolts. See Figure. Carefully remove the ignition cassette. Remove ignition coil(s) from ignition cassette as necessary.