Removal (Seville)
WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the air duct clamp at the throttle body. Remove the duct from the throttle body. Remove the Powertrain Control Module (PCM) cover. See Figure. Disconnect the Mass Air Flow/Intake Air Temperature (MAF/IAT) sensor connector. Remove the air cleaner element. See AIR CLEANER ELEMENT .
- Loosen the air duct clamp at the throttle body. Remove air cleaner intake duct and resonator. Remove the PCM. Remove the push in retainers securing the upper filler panel to the vehicle. Remove the upper filler panel from the vehicle. Remove the 3 screws securing the air cleaner assembly to the vehicle and remove the assembly.