EVAP Canister Purge Solenoid: Installation
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Position the EVAP canister purge solenoid on the intake manifold and install the retainer bolt. Tighten the EVAP canister purge solenoid retaining bolt to specification. See TORQUE SPECIFICATIONS . Connect the EVAP canister purge pipe and the vacuum supply hose. Connect the EVAP canister purge valve electrical connector.