LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle)) >> Repair Instructions >> Valve Lifter Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Coat the lifters with prelube GM P/N 1052367 (Canadian P/N 992869) or equivalent.
  2. Install the lifters to the same location from which they were removed.
  3. Install the lifter guides.
  4. Install the lifter guide bolts.

    Tighten: 

    Tighten the bolts to 10 N.m (89 in lbs) 

    Fig 1: Valve Lifter Components
    G01763598Courtesy of GENERAL MOTORS CORP.
  5. Install the intake manifold oil splash shield
    Fig 2: Intake Manifold Oil Splash Shield
    G01763599Courtesy of GENERAL MOTORS CORP.
  6. Install the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .
  7. Install the lower intake manifold. Refer to Intake Manifold Replacement - Upper .
scientia non olet · About LEMON Manuals