LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 353 (Engine Controls - Removal & Installation, Overhaul) >> Solenoids >> Secondary Air Injection Solenoid >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secondary Air Injection (AIR) solenoid is located behind the right front fender, between the wheelhouse and the dash panel, below the battery. See Figure. Raise and support the vehicle.
  2. Remove the right front tire and wheel. Remove the bolts attaching the right front wheelhouse filler panel. See Figure. Remove the filler panel. Remove the vacuum hoses from the AIR solenoid. Remove AIR Solenoid. To install, reverse removal procedure.